|Model Number/Name||PCZ 1000A|
|Phase||Single Phase and Three Phase|
|Maximum input Load||1000 W|
|Crest Factor Function||1.4 to 4.0|
Parallel operation expands the load capacity.
Up to 5 units can be operated in parallel (Max. 5 kW, 50 Arms).
Equipped with tracking operation function.
Facilitating load tests for peak or harmonic currents helps reduce design and labor time and cost as well as improve the quality of the unit under test.
|Model Name/Number||KIKUSUI PLZ-4W series|
|Sequence Function||256 Steps of Normal Sequence and 1024 Steps of First Sequence|
|Maximum Load||9 KW|
0(Zero) V input: The 164WA and 664WA of PLZ-4W series permit a load input up to the rated current even when the Input Voltage is set for 0(Zero) V.
Convenient function for discharging test of cells: The PLZ-4W can measure the time from load-on to load-off. When combined with under voltage protection (UVP) function, the time from when the battery discharge is started until the battery voltage falls to the cutoff voltage can be measured. Also, you can set the timer so it will load-off automatically after a specified time elapses from the load-on mode.
Booster unit PLZ-2004WB: To achieve a large capacity system at low cost, the PLZ1004W has an expandable option PLZ2004WB as a booster unit. Using one PLZ-1004W as a master unit, a maximum of 4 booster units can be parallel connected. (Max. 9kW, 1800A) Note: PLZ2004WB(Booster unit) can be used for the PLZ-1004W only. It cannot be connected and used with any other model.
Various Functions: The PLZ-4W Series has equipped with all the same functions of its former type of the PLZ-3W Series, such as the Soft-start Function, Lock Function, Short Function, ABC Memory Function, Set-up Memory Function, Switching Functions, etc.
GPIB, RS-232C, USB as standard equipment.