Fujikura Splicing Machines And Accessories

Product Details:

The Fujikura 70RC Fusion Splicer is equipped with a precision, fixed v-groove for splicing single fibers or ribbon fiber up to 12 fibers. Incorporating the proven ruggedized features pioneered by Fujikura, it has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. A new auto-start “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 40-second shrink time for a 12-fiber ribbon. The result is a total splice process time of approximately 55 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 110 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before.

Features:
• Automated and programmable wind protector.
• 40-second automated tube heater.
• Fully ruggedized for shock, dust, and moisture.
• Li-ion battery with 110 splices/shrinks per charge.
• Onboard training and support videos.
• Internet software upgrades.
• Multi-function transit case with an integrated workstation.

Other Details :

• Model FSM-70RC Fusion Splicer
• Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655)
• Fiber Count Single, 2, 4, 5, 6, 8, 10, 12
• Coating Diameter Ribbon: 0.25 mm to 0.4 mm, Single: 250 µm and 900 µm
• Typical Average Splice Loss 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS; measured by cut-back method relevant to ITU-T and IEC standards
• Arc Calibration Method Automatic, real-time by using results of the previous splice when in AUTO mode, manual arc calibration function available
• Splicing Modes 100 preset and user programmable modes
• Splice Loss Estimate Based upon dual camera cladding alignment data
• Fiber Display X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation
• Magnification 35X to 90X
• Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating
• Operating Condition 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C respectively
• Tube Heater Built-in tube heater with 30 heating modes; auto-start function
• Tube Heating Time Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves
• Protection Sleeve Length 60 mm, 40 mm, Micro
• Splice/Heat Cycles with Battery Typical 110 cycles with power save functions activated
• Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-13, 13.2V DC with BTR-08 battery
• Terminals USB 1.1 (USB-B type) for PC communication, Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
• Wind Protection Maximum wind velocity of 15m/s (34 mph)
• Dimensions 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches)
• The weight of AC adapter: 2.5 kg (5.5 lbs) with battery

Additional Information:

• Item Code: FSM-70R
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Two camera, active cladding alignment
• 5" touchscreen monitor
• Interchangeable sheath clamps and fiber holders
• Fully ruggedized for shock, moisture and dust resistance
• Extended-life electrodes, 5,000 splices, exchangeable without tools
• Long-life battery (200 splices/shrinks per charge).

Additional Information:

• Delivery Time: 1 week

Product Details:

The Fujikura 62C+ Optical Fiber Fusion Splicer core alignment model fusion splicer provides low loss splice results without adding more expensive automated features. A conventional flip open style wind protector and non-motorized tube heater reduce the complexity of the splicer without substantially increasing total cycle time. Fully rugged for shock, dust, and moisture.

Additional Information:

• Item Code: Fujikura-62C
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: 1 week

Product Details:

The Fujikura 22S Fusion Splicer is designed for high-end FTTH splicer applications in FTTX, Data Center / LAN, and Access Networks. It offers an active V-Groove alignment single fiber splicer for reliable and improved splicing performance for a range of different fibers; SMF, MMF, DSF, NZDSF. it is applicable from 125μm cladding diameter/up to 3mm sheath diameter fibers with sheath clamp. It produces an automated tube-heating time of 30 seconds (single mode 60mm).
Applications and Fibres:

• FTTX,FTTH
• Singe-Mode Fibre, Multi-mode Fibre, Dispersion-Shifted Fibre (DSF), Non-Zero Dispersion-Shifted Fibre (NZDSF).

Additional Information:

• Port of Dispatch: New Delhi

Product Details:

The Fujikura 80C+ is a fully ruggedized, core alignment fusion splicer, providing consistent, low loss, splice performance. The new design streamlines the steps required to complete splices, resulting in greater productivity. “Configurable automation” features allow you to customize the operation of the machine to best suit your particular splicing technique and process. A new programmable “automatic wind protector” closes and begins the splicing process after clamping the fibers in position or pressing the “set” button. Once the splice is completed, not only is the wind protector opened but one of the sheath clamps, you decide which, is automatically raised making removal of the fibers fast and easy! Similarly, the "clamshell" design of the tube heater clamps the splice protection sleeve and applies heat from both sides which results in a reduced shrink time of just 9 seconds.
Features:

• Automatic and fully programmable wind protector.
• Li-Ion battery with 200 splices/shrinks per charge.
• 9-second tube heater.
• High capacity Lithium-Ion battery pack (200 splices/shrinks)
• Internet software upgrades.
• 5 mm cleave length for splice on the connector or small package needs.
• Fully ruggedized for shock, dust, and moisture.
• Onboard training and support videos.
• Multi-function transit case with the integrated workstation.

Product Details:

The new FSM-50S Fusion Splicer's leading-edge features, including unprecedented size, weight, and ruggedness, make it the first core-alignment splicer truly optimized for field use, including FTTH applications. Automation such as calibration-free arc (with AUTO splice mode), automatic fiber identification and reduced operational steps, provides ease of use. In addition, the FSM-50S offers increased flexibility with user selectable front or top monitor positioning. The FSM-50S splicer has been designed for use in harsh, outdoor conditions and features an innovative wind protector, which allows splicing in 30 mph cross winds.

Features

Automatic core to core, low-loss splicing regardless of fiber quality or age

9 second splicing time

35 second heat time

Wind protector design withstands 30 mph cross wind

User selectable monitor position

Excellent visibility in bright sunlight with 5.6" TFT Color LCD display

Multiple pre-programmed modes for specialized splicing

Optional data download kit to connect splicer to PC

Additional Information:

• Item Code: 50S
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Delivery Time: 1 week

Product Details:

SS03 have three holes. The smallest hole is for stripping 250 um cable down to glass fiber. The second hole is for stripping 900 um buffer coating down to 250 um buffer coating. The biggest hole is for stripping 2-3mm fiber jacket down to 900 um buffer coating.
FEATURES:

·         Fiber count : Single Fiber

·         Fiber coating material : Nylon and Silicon

·         Coating / Cladding diameter :250 / 125 um; 900 / 125 um; 2000 to 3000 / 900 um
Weight: 100g 

 

 

Additional Information:

• Delivery Time: ex-stock

Product Details:

Fujikura 48S is a single Fiber Splicing Machine. It is a Core alignment Splicing Machine which gives excellent and accurate results. It has 100 Splice modes and 30 heating modes. It also has the capability to store 10000 splice results.
Display: 4.9 inch TFT with Touch screen fully loaded with user friendly. Fujikura 48S compact size and light weight enables to carry it and use in various environment conditions

Additional Information:

• Delivery Time: Ex-Stock

Product Details:

The 66S is a core alignment fusion splicer equipped with PAS( Profile Alignment System) for precise core to core fiber alignment for consistence low splice loss and accurate splice loss estimation regardless of fiber type or quality. The Fujikura 66S has series of features, “Easy sleeve positioning” for quicker splicing cycle. It equips 5 inches size LCD monitor with touch screen.
Fujikura 66S design, compact size and light weight enables to carry it and use in various environment conditions.

Additional Information:

• Item Code: Fujikura66S
• Delivery Time: with in 7 days

Product Details:

• Fujikura Splicer 38S :used for CATV and ISP/core estimation feature/low price/core to core splicing/
• core loss estimation function.
• Bluetooth capability connection.
• Touch panel with easy operation.
• Typical splice time: 6Sec.
• Splice result storage: 10,000
• Splice mode/heating mode-100 splice modes/30 heating modes.
• Return loss: >> 60 dB.

Additional Information:

• Item Code: Fujikura38S
• Production Capacity: Typical 200 cycles with BTR 11
• Delivery Time: 1 week

Product Details:

Fujikura Splicing machine for internet service provider and cable tv/low cost/cheap price
FEATURES:

• Active V-groove alignment.
• Fast splicing time-6 Sec.
• Touch Panel with easy operation.
• Electrode life-5000 splices.
• Simple lightweight carrying case for good mobility.

Additional Information:

• Item Code: Fujikura28S
• Delivery Time: 1 week

Product Details:

1. Fujikura Splicing machine used for Telecommunication and CATV
2. Core to core Alignment.
3. Fast Splicing time-6 Sec
4. Single fiber fusion splicer.
5. Bluetooth capability connection.
6. Tube heating time-15 sec.
7. Multi-functional carrying case with integrated work station.

Additional Information:

• Item Code: Fujikura62CPlus
• Delivery Time: 4-5 days

Product Details:

Fujikura 88S is a new core alignment Fusion splicer with Faster automation feature. The faster automated feature of 88S fusion splicer reduces installation times.The 88S fusion splicer automatically identifies the optimum arc discharge parameters in accordance with the ???ber type. The sheath clamp of the 88S fusion splicer is compatible with loose tube fiber. The 88S fusion splicer and CT50 ???ber cleaver are enabled with wireless data connectivity. This capability allows automatic cleaver blade rotation when the splicer judges the blade is worn. Also, the 88S fusion splicer can connect to two CT50s simultaneously.

 

Additional Information:

• Delivery Time: Ex-stock

Product Details:

Fujikura 88R is a mass fusion splicer with a series of features, such as Automatic wind-protector and tube eater and Easy sleeve positioning for quicker splicing cycle as well as fewer operation steps. Also, Fujikura 88R equips Wireless communication function which allows automatic cleaver blade rotation for CT50 when the splicer judges the blade is worn.

Fujikura 88R achieves low splicer loss with loss estimation feature. The splicing time is 11 sec and heating time is 13 sec only. The battery pack capacity provides 165 splice and heat cycles per one charge. Its compact size and light weight, enables to carry it and use in various environment conditions. The 88R equips 5 inches size LCD monitor with touch screen. It provide up to x60 magnifications fiber image. USB 2.0 Mini B type interface provide data transfer function with PC. Also, Bluetooth 4.1LE provides the data communication with fiber cleaver CT50 to manage cleaver its blade.

Additional Information:

• Item Code: Fujikura88R
• Delivery Time: ex-stock

Product Details:

Brand new Pro'sKit 8PK-326  wire stripper and strips 125 micron glass fiber with 250 micron buffer coating without scratching.

Features:
Made of superior tool steel for easy using.
Anti-slip handle, convenient for operation.
Sharp serrated edges in a plier style for wire pulls and loops.
Wire stripping range: big hole from 1.6 3 mm strip to 600-900 um.
The middle from 600-900 - mm strip to 250 μm, holes from 250 μm to 125 μm.
Convenient plier nose and sharp edge for pulling out the wire easily without damaging the wire cores.
Range of application: computer wires; home appliance wires; wire of radio and fax machines, and some others.

Specifications:

• Material: S50C
• Hardness: 48±2
• Brand Name: Pro'sKit
• Brand Number: 8PK-326
• Type: Combination Pliers
• Package size: 22 * 9 * 1.5cm / 8.7 * 3.5 * 0.6in
• Package weight: 130g / 4.6oz

Package list:
1 * Pro'sKit 8PK-326 Fiber Optical Stripper

Additional Information:

• Port of Dispatch: Delhi
• Delivery Time: 1 week