Keith Electronics Private Limited
RK Puram, New Delhi, Delhi
GST No. 07AAACK0152E1Z5
TrustSEAL Verified
Call 0804897950949% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model Name/Number | FC9000-140 |
| Brand | Graphtec |
| Product description | Cutting Plotter |
| Imaging technology | N/A |
| Printing Speed | N/A |
| Configuration | Grit rolling type |
| Print Application | N/A |
| Supported Media width | 50 inches |
| RAM | 2MB |
| Item | FC9000-140 |
| Configuration | Grit rolling type |
| Drive method | Digital servo drive |
| Max. cutting area (W x L) (*1) | 1372mm × 50m |
| Cutting area of guaranteed accuracy (*1) | 1352mm × 10m, 762mm × 15m |
| Mountable media width (*2) | Min. 50mm, Max. 1529mm, (60.1 inch) |
| Mountable roll media diamete | 76 to 200mm (160mm when the optional paper ange (OPH-A21) is installed) |
| Mountable roll media mass | 20kg |
| Compatible take-up roll width | 200 to 1372mm |
| Compatible take-up roll mass | 20kg |
| Maximum cross cut width | 1372mm |
| Max. cutting speed | 1485mm/s at 45° direction |
| Axial acceleration | Max. 39.2m/s2 at 45° direction |
| Cutting force | Max. 5.88N (600gf) |
| Minimum character size | Approx. 5 mm alphanumeric (varies depending on character font and media) |
| Mechanical resolution | 0.005mm |
| Programmable resolution | GP-GL???0.1 / 0.05 / 0.025 / 0.01mm, HP-GL™ (*3)???0.025mm |
| Repeatability (*1) | Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) |
| Number of push rollers | 4 rollers (Max. 5 (option)) |
| Mountable number of tools | 1 tool (mountable 2 tools (option)) |
| Blade types | Supersteel |
| Pen types | Oil-based ballpoint pen, Water-based fiber-tip pen |
Additional Information:
Product Details:
| Brand | Graphtec |
| Model Type | Grit Rolling Plotter |
| Voltage | 100V to 240V AC |
| Model Name/Number | CE7000-60 |
| Printing Speed | NA |
| Supported Media width | 24inch |
| Items | CE7000-60 |
| Configuration | Grit rolling type |
| Max. cutting area (W x L) (*1) | 603?????? × 50??? |
| Cutting area of guaranteed accuracy (*1) | 583?????? × 2m |
| Mountable roll media mass | 9 kg |
| Number of push rollers | 2 rollers |
| Max. cutting speed | 900mm/s ,at 45° direction |
| Acceleration | 21.2 s2 at 45° direction |
| Cutting force | Max. 4.41N (450gf) |
| Minimum character size | Approx. 5 mm alphanumeric (varies depending on character font and media) |
| Mechanical resolution | 0.005mm |
| Programmable resolution | GP-GL 0.1/0.05/0.025/0.01 HP-GL™ (*2 0.025?????? |
| Repeatability (*1) | Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) |
| Mountable number of tools | 1 tool |
| Blade types | Supersteel |
| Pen types | Oil-based ballpoint pen, Water-based fiber-tip pen |
| Media types | Up to 0.25mm thickness, Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions) |
| Interface | USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX |
| Buffer memory | 2MB |
| Command sets | GP-GL / HP-GL™ (Set by command or auto-detect) (*2) |
| Display | Graphic type LCD with back-light (240dots x 128dots), supports 10 languages |
| Power source | 100V to 240V AC, 200V to 240V AC, 50 / 60 Hz |
| Power consumption | Up to 100W |
| Operating environment | 10 to 35 ºC, 35 to 75 % R.H. (non-condensing) |
| Guaranteed accuracy environment | 16 to 32 ºC, 35 to 70 % R.H. (non-condensing) |
Additional Information:
Product Details:
| Brand | Graphtec |
| Model Name/Number | CE7000-130 |
| Product description | N/A |
| Imaging technology | N/A |
| Printing Speed | N/A |
| Configuration | N/A |
| Supported Media width | 50 inches |
| RAM | 2MB |
| Items | CE7000-130 |
| Configuration | Grit rolling type |
| Drive method | Digital servo drive |
| Max. cutting area (W x L) (*1) | 1270?????? × 50 |
| Cutting area of guaranteed accuracy (*1) | 1250?????? × 2m |
| Mountable media width | 1372mm (54inch) |
| Mountable roll media mass | 17 kg |
| Number of push rollers | 4 rollers (Max. 5 (option)) |
| Max. cutting speed | 1000mm/s at 45° direction |
| Acceleration | 13.9m/s2 at 45° direction |
| Cutting force | Max. 4.41N (450gf) |
| Minimum character size | Approx. 5 mm alphanumeric (varies depending on character font and media) |
| Mechanical resolution | 0.005mm |
| Programmable resolution | GP-GL 0.1/0.05/0.025/0.01 HP-GL™ (*2)???0.025?????? |
| Repeatability (*1) | Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) |
| Mountable number of tools | 1 tool |
| Blade types | Supersteel |
| Pen types | Oil-based ballpoint pen, Water-based fiber-tip pen |
| Media types | Up to 0.25mm thickness ,Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions) |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | Graphtech |
| Model Name/Number | FC9000-140 |
| Product description | Cutting Plotter |
| Imaging technology | N/A |
| Printing Speed | N/A |
| Configuration | Grit Rolling Type |
| Supported Media width | Retro,Vinyl, Adhesive Sheet |
| RAM | 2MB |
| Item | FC9000-140 |
| Configuration | Grit rolling type |
| Drive method | Digital servo drive |
| Max. cutting area (W x L) (*1) | 1372mm × 50m |
| Cutting area of guaranteed accuracy (*1) | 1352mm × 10m, 762mm × 15m |
| Mountable media width (*2) | Min. 50mm, Max. 1529mm, (60.1 inch) |
| Mountable roll media diamete | 76 to 200mm (160mm when the optional paper ange (OPH-A21) is installed) |
| Mountable roll media mass | 20kg |
| Compatible take-up roll width | 200 to 1372mm |
| Compatible take-up roll mass | 20kg |
| Maximum cross cut width | 1372mm |
| Max. cutting speed | 1485mm/s at 45° direction |
| Axial acceleration | Max. 39.2m/s2 at 45° direction |
| Cutting force | Max. 5.88N (600gf) |
| Minimum character size | Approx. 5 mm alphanumeric (varies depending on character font and media) |
| Mechanical resolution | 0.005mm |
| Programmable resolution | GP-GL???0.1 / 0.05 / 0.025 / 0.01mm, HP-GL™ (*3)???0.025mm |
| Repeatability (*1) | Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) |
| Number of push rollers | 4 rollers (Max. 5 (option)) |
| Mountable number of tools | 1 tool (mountable 2 tools (option)) |
| Blade types | Supersteel |
| Pen types | Oil-based ballpoint pen, Water-based fiber-tip pen |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | Graphtec |
| Model Type | Grit Rolling Cutting Plotter |
| Model Name/Number | CE7000-130 |
| Voltage | 100V to 240V AC,200V to 240V AC,50 / 60 Hz |
| RAM | 2MB |
| Cutting Force | Max. 4.41N (450gf) |
| Max. Cutting Speed | 1000mm/s at 45 Degree direction |
| Minimum Character Size | Approx. 5 mm alphanumeric (varies depending on character font and media) |
| Number Of Push Rollers | 4 rollers (Max. 5 (option)) |
| Items | CE7000-130 |
| Configuration | Grit rolling type |
| Drive method | Digital servo drive |
| Max. cutting area (W x L) (*1) | 1270 × 50 |
| Cutting area of guaranteed accuracy (*1) | 1250 × 2m |
| Mountable media width | 1372mm (54inch) |
| Mountable roll media mass | 17 kg |
| Number of push rollers | 4 rollers (Max. 5 (option)) |
| Max. cutting speed | 1000mm/s at 45° direction |
| Acceleration | 13.9m/s2 at 45° direction |
| Cutting force | Max. 4.41N (450gf) |
| Minimum character size | Approx. 5 mm alphanumeric (varies depending on character font and media) |
| Mechanical resolution | 0.005mm |
| Programmable resolution | GP-GL???0.1/0.05/0.025/0.01 HP-GL™ (*2)???0.025?????? |
| Repeatability (*1) | Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) |
| Mountable number of tools | 1 tool |
| Blade types | Supersteel |
| Pen types | Oil-based ballpoint pen, Water-based fiber-tip pen |
| Media types | Up to 0.25mm thickness ,Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions) |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | GHAPHTEC |
| Model Name/Number | FC9000-140 |
| Product description | Cutting Plotter |
| Imaging technology | N/A |
| Printing Speed | N/A |
| Configuration | Grit Rolling Type |
| Print Application | N/A |
| Supported Media width | 60'' |
| Item | FC9000-140 |
| Configuration | Grit rolling type |
| Drive method | Digital servo drive |
| Max. cutting area (W x L) (*1) | 1372mm × 50m |
| Cutting area of guaranteed accuracy (*1) | 1352mm × 10m, 762mm × 15m |
| Mountable media width (*2) | Min. 50mm, Max. 1529mm, (60.1 inch) |
| Mountable roll media diamete | 76 to 200mm (160mm when the optional paper ange (OPH-A21) is installed) |
| Mountable roll media mass | 20kg |
| Compatible take-up roll width | 200 to 1372mm |
| Compatible take-up roll mass | 20kg |
| Maximum cross cut width | 1372mm |
| Max. cutting speed | 1485mm/s at 45° direction |
| Axial acceleration | Max. 39.2m/s2 at 45° direction |
| Cutting force | Max. 5.88N (600gf) |
| Minimum character size | Approx. 5 mm alphanumeric (varies depending on character font and media) |
| Mechanical resolution | 0.005mm |
| Programmable resolution | GP-GL???0.1 / 0.05 / 0.025 / 0.01mm, HP-GL™ (*3)???0.025mm |
| Repeatability (*1) | Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) |
| Number of push rollers | 4 rollers (Max. 5 (option)) |
| Mountable number of tools | 1 tool (mountable 2 tools (option)) |
| Blade types | Supersteel |
| Pen types | Oil-based ballpoint pen, Water-based fiber-tip pen |
Product Details:
| Brand | Graphtec |
| Model Name/Number | CE7000-60 |
| Product description | N/A |
| Imaging technology | N/A |
| Printing Speed | N/A |
| Configuration | N/A |
| Supported Media width | 28inch |
| RAM | 2MB |
| Items | CE7000-60 |
| Configuration | Grit rolling type |
| Max. cutting area (W x L) (*1) | 603 × 50 |
| Cutting area of guaranteed accuracy (*1) | 583 × 2m |
| Mountable roll media mass | 9 kg |
| Number of push rollers | 2 rollers |
| Max. cutting speed | 900mm/s ,at 45° direction |
| Acceleration | 21.2???/s2 at 45° direction |
| Cutting force | Max. 4.41N (450gf) |
| Minimum character size | Approx. 5 mm alphanumeric (varies depending on character font and media) |
| Mechanical resolution | 0.005mm |
| Programmable resolution | GP-GL???0.1/0.05/0.025/0.01 HP-GL™ (*2 0.025 |
| Repeatability (*1) | Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) |
| Mountable number of tools | 1 tool |
| Blade types | Supersteel |
| Pen types | Oil-based ballpoint pen, Water-based fiber-tip pen |
| Media types | Up to 0.25mm thickness, Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions) |
| Interface | USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX |
| Buffer memory | 2MB |
| Command sets | GP-GL / HP-GL™ (Set by command or auto-detect) (*2) |
| Display | Graphic type LCD with back-light (240dots x 128dots), supports 10 languages |
| Power source | 100V to 240V AC, 200V to 240V AC, 50 / 60 Hz |
| Power consumption | Up to 100W |
| Operating environment | 10 to 35 ºC, 35 to 75 % R.H. (non-condensing) |
| Guaranteed accuracy environment | 16 to 32 ºC, 35 to 70 % R.H. (non-condensing) |
Additional Information:
Product Details:
| Brand | Graphtec |
| Print Resolution | N/A |
| Model Name/Number | CE7000-130 |
| Memory | 2MB |
| Print Technology | N/A |
| Connectivity Interface | USB |
| Ink Type | N/A |
| RAM | 2MB |
| Items | CE7000-130 |
| Configuration | Grit rolling type |
| Drive method | Digital servo drive |
| Max. cutting area (W x L) (*1) | 1270 × 50 |
| Cutting area of guaranteed accuracy (*1) | 1250 × 2m |
| Mountable media width | 1372mm (54inch) |
| Mountable roll media mass | 17 kg |
| Number of push rollers | 4 rollers (Max. 5 (option)) |
| Max. cutting speed | 1000mm/s at 45° direction |
| Acceleration | 13.9m/s2 at 45° direction |
| Cutting force | Max. 4.41N (450gf) |
| Minimum character size | Approx. 5 mm alphanumeric (varies depending on character font and media) |
| Mechanical resolution | 0.005mm |
| Programmable resolution | GP-GL 0.1/0.05/0.025/0.01 HP-GL™ (*2)???0.025?????? |
| Repeatability (*1) | Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) |
| Mountable number of tools | 1 tool |
| Blade types | Supersteel |
| Pen types | Oil-based ballpoint pen, Water-based fiber-tip pen |
| Media types | Up to 0.25mm thickness ,Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions) |
Additional Information: