Keith Electronics Private Limited
RK Puram, New Delhi, Delhi
SEND SMS
SEND EMAIL
In our extensive range of products, we are offering a wide assortment of Flatbed Cutting Plotters. These plotters are known among clients for their longer functional life, durability and minimum maintenance. These plotters are procured from the certified vendors who use superior quality raw material in the fabrication process. In addition to this, the offered plotters are rigorously tested on various parameters in order to deliver flawless range at clients’ end.
Product Details:
| Minimum Order Quantity | 1 Piece |
| Guided System | plotter |
| Machine Type | plotter |
| Brand | graphtec |
| Production Capacity | 200 with in one command |
| Power Source | 100 to 240 V AC |
| Supported standard sized media | A3 Size (It is loaded with portrait orientation.) |
| Dimensions | 672 (W) x 820 (D) x 266 (H) mm |
| Weight | 25 kg |
| Specifications:- | ||
| Unit | Item | Description |
| The whole system (Auto sheet feeder unit with cutter unit) | Supported standard-sized media | A3 Size (It is loaded with portrait orientation.) |
| Interface to PC | Single port of USB (The USB hub to connect the auto feeder unit and cutter unit is included.) | |
| Power source | 100 to 240 V AC (It is required three power outlet.) | |
| Operating environment | Temperature: 10 to 35 ºC, Humidity: 35 to 75 % RH (non-condensing) | |
| Dimensions | When the entire system is placed on the table - Size of the upper part from the table: Approx. 672 (W) x 820 (D) x 266 (H) mm - Size of the lower part from the table: Approx. 672 (W) x 380 (D) x 420 (H) mm * The CE6000-60/PLUS is placed to edge of table. Refer the illustration of Dimensions. | |
| Weight | Approx. 25 kg (Cutter unit: 11 kg, Auto feeder unit: 10 kg, Catch tray: 4kg) | |
| Auto sheet feeder unit (F-Mark) | Supported media | Width: 279 to 350 mm, Length: 210 to 500 mm (up to 700 mm when the option EXTENDER is installed.) |
| Up to 350 g/m2 (It is the grammage of the media that can be handled by the automatic feeder unit.) | ||
| The capacity of supply tray | Up to 200 sheets or up to 35mm height (It varies by the material, thickness, and condition of media.) | |
| Interface | USB2.0 | |
| Power source | AC adapter, 100 to 240 V AC, Approx. 60 VA at an output power | |
| Compatible Standards | Main body: cus mark, CE mark, FCC | |
| AC adapter: UL, cUL, CE mark, FCC, PSE, CCC | ||
| Digital Cutting Software | Supported OS | Windows 10, 8.1, 8, 7 |
| Contour cutting data format | ai (Illustrator version 8) and eps | |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Applications | Full Cutting, Creasing, Partten cutting |
| Model Type | FC4000-50ES |
| Usage/Application | PVC, Paper, Sticker, Lable |
| Driven Type | Electric |
| Classification | Double-blade Cutter |
| Blade Material | Stainless Steel |
| Brand/Make | Graphtec |
| Item | FCX4000-50ES | ||
| Configuration | Digital servo system, Flatbed | ||
| Media hold-down method | Electrostatic panel | ||
| Effective cutting area | 661 mm × 488 mm | ||
| Mountable media | 537 mm | ||
| (Y-axis direction) | |||
| Maximum cutting speed | 751 mm/s (1 to 75 cm/s in 23 steps) | ||
| Cutting pressure | Tool 1: Max. 5.88 N¿¿¿(600 gf) | ||
| Tool 2: Max. 5.88 N¿¿¿(600 gf) | |||
| Cutting force settings | Tool 1: in 48 steps, Tool 2: in 48 steps | ||
| Minimum character size | Approx. 10 mm square (varies with character font and media) | ||
| Mechanical resolution | 0.005 mm (5µm) | ||
| Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, | ||
| HP-GL™ (*1) : 0.025 mm | |||
| Distance accuracy | Max.0.2% of the distance moved or 0.1mm, whichever is larger | ||
| (excluding contraction of media, in plotting/cutting mode) (*2) | |||
| Perpendicularity | Max 0.3 mm / 430 mm | ||
| Repeatability | Max 0.1mm (excluding contraction of media, in plotting/cutting mode) (*2) | ||
| Standard interfaces | USB2.0 (Full Speed) / RS-232C / Ethernet (10BASE-T/100BASE-TX) | ||
| Buffer memory | 2MB | ||
| Command sets | GP-GL / HP-GL™ / AUTO (Automatic switching in GP-GL and HP-GL™) | ||
| Number of tools | 3 tools |
Product Details:
| Minimum Order Quantity | 1 Unit |
| Applications | half cut, full cut, box making |
| Usage/Application | pattern cutting |
| Driven Type | Electric |
| Classification | Double-blade Cutter |
| Max Cutting Width | 2X2 |
| Blade Material | Stainless Steel |
| Model name | FCX2000-60VC | ||||
| Configuration | Digital servo system, Flatbed | ||||
| Media hold-down method | Vacuum suction | ||||
| Effective cutting area | 610mm x 920mm | ||||
| Mountable media (Y-axis) | 950mm | ||||
| Roll media support | Roll media stocker (manual feeding), supported media; width: up to 950 mm, weight: up to 5 kg | ||||
| Maximum cutting speed | 400 mm/s (1 to 40 cm/s in 16 steps), in all directions | ||||
| Cutting force | Tool 1: Max. 4.9 N (500 gf), Tool 2: Max. 9.8 N (1 kgf) | ||||
| Cutting force settings | Tool 1: in 40 steps, Tool 2: in 40 steps | ||||
| Minimum character size | Approx. 10 mm square (varies with character font and media) | ||||
| Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ : 0.025 mm | ||||
| Distance accuracy | Max. 0.1% of the distance moved or 0.1 mm, whichever is larger (in plotting mode) (*2) | ||||
| Perpendicularity | Max 0.5 mm / 900 mm (in plotting mode) | ||||
| Repeatability | Max 0.1 mm (excluding contraction of media, in plotting/cutting mode) (*2) | ||||
| Standard interfaces | RS-232C, USB2.0 (High-Speed), and Ethernet (10BASE-T/100BASE-TX) | ||||
| Buffer memory | 2MB | ||||
| Command sets | GP-GL and HP-GL™ emulation (set by menu, or selects automatically by received data) | ||||
| Number of tools | Two tools | ||||
| Cutting blade, pen, and tool types | Cutting blade (supersteel), Pens (Water-based fiber-tip pen, oil-based ballpoint pen), and Creasing/scoring tool | ||||
| Others | ARMS, Reverse side Cutting/Creasing using ARMS, ARMS Copy function, Creasing, Cutting/creasing in multiple passes | ||||
| Power source | 100 to 240 VAC, 50/60 Hz (Auto switching) | ||||
| Power consumption | Max. 140 VA | ||||
Product Details:
| Brand/Make | Graphtec |
| Effective Cutting Area | 610mm x 920mm |
| Maximum Cutting Speed | 400 mm/s (1 to 40 cm/s in 16 Steps) |
| Buffer Memory | 2 MB |
| Power Source | 100 to 240 V AC, 50/60 Hz (Auto Switching) |
| Model name | FCX2000-60VC | |||
| Configuration | Digital servo system, Flatbed | |||
| Media hold-down method | Vacuum Suction | |||
| Mountable media (Y-axis) | 950mm | |||
| Roll media support | Roll media stocker (manual feeding), supported media; width: up to 950 mm, weight: up to 5 kg | |||
| Cutting force | Tool 1: Max. 4.9 N (500 gf), Tool 2: Max. 9.8 N (1 kgf) | |||
| Cutting force settings | Tool 1: in 40 steps, Tool 2: in 40 steps | |||
| Minimum character size | Approx. 10 mm square (varies with character font and media) | |||
| Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ : 0.025 mm | |||
| Distance accuracy | Max. 0.1% of the distance moved or 0.1 mm, whichever is larger (in plotting mode) (*2) | |||
| Perpendicularity | Max 0.5 mm / 900 mm (in plotting mode) | |||
| Repeatability | Max 0.1 mm (excluding contraction of media, in plotting/cutting mode) (*2) | |||
| Standard interfaces | RS-232C, USB2.0 (High-Speed), and Ethernet (10BASE-T/100BASE-TX) | |||
| Command sets | GP-GL and HP-GL™ emulation (set by menu, or selects automatically by received data) | |||
| Number of tools | Two tools | |||
| Cutting blade, pen, and tool types | Cutting blade (Supersteel), Pens (Water-based fiber-tip pen, oil-based ballpoint pen), and Creasing/scoring tool | |||
| Others | ARMS, Reverse side Cutting/Creasing using ARMS, ARMS Copy function, Creasing, Cutting/creasing in multiple passes | |||
| Power consumption | Max. 140 VA | |||
| Registration mark sensing system | Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect | |||
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand/Make | Graphtec |
| Maximum Cutting Speed | 750 mm/s (30 inches) (1 to 75 cm/s in 23 Steps) |
| Minimum Character Size | Approx. 5 mm |
| Perpendicularity | Max 0.4 mm / 610 mm |
| Buffer Memory | 2 MB |
| Configuration | Digital servo system, Flatbed |
| Media hold-down method | Adhesive sheet/mat |
| Effective cutting area | 860 x 600 mm (33.8 x 23.6 inch) |
| Mountable media | 666 mm (26.2 inches) |
| (Y-axis direction) | |
| Media type | Marking film (vinyl, fluorescent, and reflective) |
| Stiff paper/card (for stencils, etc.) up to 0.5 mm thick | |
| Polystyrene foam sheets up to 0.8 mm thick | |
| Sandblast rubber sheets up to 1.0 mm thick | |
| Microflute board (F/G grades) | |
| Clear sheets for plastic boxes | |
| High-intensity reflective film | |
| Cutting pressure | Tool 1, Tool 2: Max. 5.88 N |
| (600 gf), in 48 steps | |
| Mechanical resolution | 0.005 mm (5μm) |
| Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ *4 : 0.025 mm |
| Distance accuracy | Max 0.2% of the distance moved or 0.1 mm, whichever is larger |
| Repeatability | Max 0.1 mm *5 |
| Standard interfaces | RS-232C, USB2.0 (High speed) |
| Command sets | GP-GL and HP-GL™ *4 emulations (selected by menu) |
| Number of tools | 2 tools |
| Cutter blade, pen, | Cutter blade: super steel |
| and tool types | Pen: oil-based ballpoint pen |
| Creasing/scoring tool |
Additional Information:
Product Details:
| Brand/Make | Graphtec |
| Effective Cutting Area | 610mm x 920mm |
| Maximum Cutting Speed | 400 mm/s (1 to 40 cm/s in 16 Steps) |
| Buffer Memory | 2 MB |
| Power Consumption | Max. 140 VA |
| Model name | FCX2000-60VC | |||
| Configuration | Digital servo system, Flatbed | |||
| Media hold-down method | Vacuum suction | |||
| Mountable media (Y-axis) | 950mm | |||
| Roll media support | Roll media stocker (manual feeding), supported media; width: up to 950 mm, weight: up to 5 kg | |||
| Cutting force | Tool 1: Max. 4.9 N (500 gf), Tool 2: Max. 9.8 N (1 kgf) | |||
| Cutting force settings | Tool 1: in 40 steps, Tool 2: in 40 steps | |||
| Minimum character size | Approx. 10 mm square (varies with character font and media) | |||
| Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ : 0.025 mm | |||
| Distance accuracy | Max. 0.1% of the distance moved or 0.1 mm, whichever is larger (in plotting mode) | |||
| Perpendicularity | Max 0.5 mm / 900 mm (in plotting mode) | |||
| Repeatability | Max 0.1 mm (excluding contraction of media, in plotting/cutting mode) | |||
| Standard interfaces | RS-232C, USB2.0 (High-Speed), and Ethernet (10BASE-T/100BASE-TX) | |||
| Command sets | GP-GL and HP-GL™ emulation (set by menu, or selects automatically by received data) | |||
| Number of tools | Two tools | |||
| Cutting blade, pen, and tool types | Cutting blade (supersteel), Pens (Water-based fiber-tip pen, oil-based ballpoint pen), and Creasing/scoring tool | |||
| Others | ARMS, Reverse side Cutting/Creasing using ARMS, ARMS Copy function, Creasing, Cutting/creasing in multiple passes | |||
| Power source | 100 to 240 VAC, 50/60 Hz (Auto switching) | |||
| Tool types | Pen: oil-based ballpoint pen | |||
| Creasing/scoring tool | ||||
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand/Make | Graphtec |
| Buffer Memory | 2 MB |
| Power Source | 100 to 240 V AC, 50/60 Hz (Auto Switching) |
| Blade Material | Supersteel |
| Max Plotting Speed (mm/sec) | 400 mm/s (1 to 40 cm/s in 16 Steps) |
| Model name | FCX2000-120VC |
| Configuration | Digital servo system, Flatbed |
| Media hold-down method | Electrostatic |
| Effective cutting area | 1,200mm x 920mm |
| Mountable media (Y-axis) | 950mm |
| Roll media support | Roll media stocker (manual feeding), supported media; width: up to 950 mm, weight: up to 5 kg |
| Cutting force | Tool 1: Max. 4.9 N (500 gf), Tool 2: Max. 9.8 N (1 kgf) |
| Cutting force settings | Tool 1: in 40 steps, Tool 2: in 40 steps |
| Minimum character size | Approx. 10 mm square (varies with character font and media) |
| Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ : 0.025 mm |
| Distance accuracy | Max. 0.1% of the distance moved or 0.1 mm, whichever is larger (in plotting mode) |
| Perpendicularity | Max 0.5 mm / 900 mm (in plotting mode) |
| Repeatability | Max 0.1 mm (excluding contraction of media, in plotting/cutting mode) |
| Standard interfaces | RS-232C, USB2.0 (High-Speed), and Ethernet (10BASE-T/100BASE-TX) |
| Command sets | GP-GL and HP-GL™ emulation (set by menu, or selects automatically by received data) |
| Number of tools | Two tools |
| Pen, and tool types | Pens (Water-based fiber-tip pen, oil-based ballpoint pen), and Creasing/scoring tool |
| Others | ARMS, Reverse side Cutting/Creasing using ARMS, ARMS Copy function, Creasing, Cutting/creasing in multiple passes |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand/Make | Graphtec |
| Max Cutting Speed (mm/sec) | 400 mm/s (1 to 40 cm/s in 16 Steps) |
| Buffer Memory | 2 MB |
| Blade Material | Supersteel |
| Minimum Character Size | Approx. 10 mm |
| Model name | FCX2000-180VC | |||
| Configuration | Digital servo system, Flatbed | |||
| Media hold-down method | Vacuum suction | |||
| Effective cutting area | 1,800mm x 920mm | |||
| Mountable media (Y-axis) | 950mm | |||
| Roll media support | Roll media stocker (manual feeding), supported media; width: up to 950 mm, weight: up to 5 kg | |||
| Cutting force | Tool 1: Max. 4.9 N (500 gf), Tool 2: Max. 9.8 N (1 kgf) | |||
| Cutting force settings | Tool 1: in 40 steps, Tool 2: in 40 steps | |||
| Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ : 0.025 mm | |||
| Distance accuracy | Max. 0.1% of the distance moved or 0.1 mm, whichever is larger (in plotting mode) | |||
| Perpendicularity | Max 0.5 mm / 900 mm (in plotting mode) | |||
| Repeatability | Max 0.1 mm (excluding contraction of media, in plotting/cutting mode) | |||
| Standard interfaces | RS-232C, USB2.0 (High-Speed), and Ethernet (10BASE-T/100BASE-TX) | |||
| Command sets | GP-GL and HP-GL™ emulation (set by menu, or selects automatically by received data) | |||
| Number of tools | Two tools | |||
| Pen, and tool types | Pens (Water-based fiber-tip pen, oil-based ballpoint pen), and Creasing/scoring tool | |||
| Others | ARMS, Reverse side Cutting/Creasing using ARMS, ARMS Copy function, Creasing, Cutting/creasing in multiple passes | |||
Product Details:
| Minimum Order Quantity | 1 Unit |
| Model Type | FCX4000-60ES |
| Driven Type | Electric |
| Classification | Double-blade Cutter |
| Max Cutting Width | 2X3 feet |
| Blade Material | Stainless Steel |
| Item | FCX4000-60ES | ||
| Configuration | Digital servo system, Flatbed | ||
| Media hold-down method | Electrostatic panel | ||
| Effective cutting area | 976 mm × 660 mm | ||
| Mountable media | 708 mm | ||
| (Y-axis direction) | |||
| Maximum cutting speed | 750 mm/s (1 to 75 cm/s in 23 steps) | ||
| Cutting pressure | Tool 1: Max. 5.88 N (600 gf) | ||
| Tool 2: Max. 5.88 N (600 gf) | |||
| Cutting force settings | Tool 1: in 48 steps, Tool 2: in 48 steps | ||
| Minimum character size | Approx. 10 mm square (varies with character font and media) | ||
| Mechanical resolution | 0.005 mm (5µm) | ||
| Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, | ||
| HP-GL™ (*1) : 0.025 mm | |||
| Distance accuracy | Max.0.2% of the distance moved or 0.1mm, whichever is larger | ||
| (excluding contraction of media, in plotting/cutting mode) (*2) | |||
| Perpendicularity | Max 0.4 mm / 610 mm | ||
| Repeatability | Max 0.1mm (excluding contraction of media, in plotting/cutting mode) (*2) | ||
| Standard interfaces | USB2.0 (Full Speed) / RS-232C / Ethernet (10BASE-T/100BASE-TX) | ||
| Buffer memory | 2MB | ||
| Command sets | GP-GL / HP-GL™ / AUTO (Automatic switching in GP-GL and HP-GL™) | ||
| Number of tools | 2 tools | ||
| Cutter blade, pen, and tool types | Cutter blade: supersteel | ||
| Pen: water-based fiber-tip pen | |||
| Creasing/scoring tool | |||
| Operating panel | 3.7-inch graphical LCD (same LCD as the FCX2000) |
